Are you looking to install luxury vinyl flooring in your home?
This popular alternative to carpets has become increasingly stylish, affordable, and easy to maintain. It’s a great option for any room in your home. In fact, it’s easier to install than traditional carpeting!
Read more to learn everything you need to know when it comes to installing luxury vinyl flooring!
Table of Contents
1. Preparing the Surface
Ensure that the subfloor surfaces are adequately prepared by cleaning any dust, dirt, and debris with a vacuum, mop, and detergent. Make any repairs necessary to ensure the area is completely level before making sure it is completely dry.
After thoroughly cleaning, apply primer onto the subfloor and let it dry for around 24 hours. This will create an even, smooth surface for the vinyl flooring to adhere to, as well as prevent any further moisture from reaching the subfloor.
2. Planning the Installation
Layout the floor and determine how many planks you need and where you need to start. Measure the walls and door frames to determine where to put the transitions. Make sure the subfloor is at the right temperature and humidity. If the substrate is too cold or too hot, the adhesive will not set properly.
Taking the time to adequately plan the installation will ensure that your luxury vinyl flooring is properly and safely installed.
3. Gather the Necessary Tools
It is important to make sure you have everything you need to install luxury vinyl flooring. You will need a hammer, drill, screwdriver, saw, tape measure, and a chalk line. The type of adhesive used to install luxury vinyl flooring depends on the subfloor, so make sure you know what type of adhesive is needed for the job. You may also need spacers, a damp cloth, and a caulking gun.
Additionally, make sure you have the correct amount of vinyl flooring based on the square footage of the room before beginning the installation process.
So if you are planning on laying vinyl flooring in your home, Boise Flooring Store keeps a wide range of options in stock at all times, including a good selection of luxury vinyl. Having the right tools and materials on hand will make the installation easier and more enjoyable!
4. Installing the First Row
Allow a gap of an eighth of an inch around the perimeter. When installing the first row of vinyl plank flooring, plan to start along the longest, straightest wall with the groove side of the plank facing the wall. Place spacers in between planks for expansion gaps.
Place the first plank against the wall and measure for the next one. Cut the next plank to fit and click it into place. Secure the planks with a tapping block and a hammer to ensure a tight fit. If using glue, spread glue evenly across the tongues. Install the remaining rows, making sure to stagger the joints for the most secure fit.
Start Installing Luxury Vinyl Flooring Today
Installing luxury vinyl flooring can seem overwhelming, but it doesn’t have to be! Following these tips and spending time planning before installation will help you achieve professional results. At the end of the day, the key to a successful luxury vinyl installation is preparation and attention to detail!
Did you find this article helpful? Check out more of our blogs!
