LED light strips are widely used for indoor and outdoor home lighting. The straightforward design makes enhancing a space simple. The lights are easy to install and look beautiful surrounding your stereo system.
However, occasionally you might need to move your LED light strips. This raises the question of whether LED strip lights can be moved off the wall and used again.
In this post, we’ll show you how to remove LED strip lights for moving in the best method possible, so they maintain their quality and are simple to reinstall once you reach your new residence.
Continue reading to get the answers to your questions related to LED strip lights relocation;
Table of Contents
Is It Possible To Reuse Relocated LED Strip Lights?
These LED strips can be taken from the wall without harming the paint or surrounding material. Set your hair dryer to the hottest setting you can manage, then start blowing hot air on the sticky side while circling it back and forth over the entire surface.
You notice a tiny softening and tackiness, similar to what glue experiences after taping up. Once enough is peeling off for you to grip onto with your fingertips, cautiously pull up on one corner and keep tugging at other locations.
You effectively removed an LED strip lights from the wall without causing any damage.
Steps To Relocate LED Strip Lights
Take an inventory of your possessions and make a plan before you begin packing your led strip lights for relocation. You will avoid future time and hassles by doing this. Think about how fragile LED strip lighting is. You will need to be careful how they are packed because they are delicate to heat and cold.
Consider your options for powering your LED strip lights throughout the transfer. So that they don’t overheat or become damaged, you’ll need to have a strategy for keeping them powered.
Setup Each LED lights Strip In A Separate Group
Take a step back and assess the situation before beginning to pack up your led strip lights. In your new house, how do you want them organized? It will be much simpler to organize everything logically once you know what you’re working with.
Begin by grouping the lights into manageable sections. Separating your lights per room may make sense if you have many lights. If you have a variety of lights, you might arrange them according to type. As a result, keeping track of everything and ensuring that nothing is lost during the relocation will be much simpler.
Start Packing The Lights
Find your LED strip lights and their original package first. If the original packing no longer exists, try to find a box or container that is comparable in size. Once you’ve located your supplies, start by inserting the led strip light into the box or container. Make sure the lamp is stable and won’t shift during transportation.
Seal The Boxes With Packing Tape
Once the light has been packed, tape the box or container shut with packing tape. To identify the contents of the box or container, make sure to label it with a permanent marker. Each LED strip you need to pack requires you to follow these steps.
How To Reuse Relocated LED Lights?
After then, you may wish to reuse the LED lights. This entails attaching it to the wall once more. Adhesive tape that has been sliced into stripes would be the simplest method. Adhesive tape for LED lights is available in several types and varieties. So, you can choose one according to your needs and requirements.
If you want to try this, you could use a glue gun. Although it works fairly well and is very simple to apply evenly, you must firmly push the LED strip against the wall for it to adhere. Superglue is a different choice, but use caution when using it.
You might not be able to see exactly where the glue lands, which makes this quite challenging. Before selecting to utilize a glue gun for my most recent project, there is a double-sided tape that may be applied twice.
You don’t have to push down firmly or apply any pressure while performing well-made things considerably simpler. Ensure that the liquid does not come into touch with your LEDs, as this could result in water damage and affect the performance of your strips.
Your LEDs’ backs should be allowed to dry before you add double-sided tape, clean the area with rubbing alcohol, and re-stick the LED in a different location.
What Does The Functionality Level Of Relocated LED Strip Lights?
LED strips can be recycled in various ways, but how you use them depends on your goals. Super glue or powerful adhesive can always re-stick LED strips in a different location. The LED strips may have been damaged when you removed them, so you should check them carefully before using them again.
You must locate a power source to accomplish this. Just put it away for the time being if that isn’t an option in your home.
Bottom Line
Removing an LED light strip is not difficult, as you may have found out, but you must proceed carefully. You must apply an adhesive backing to restick the light strip to a different wall.
The answer is possible if you want to reuse and restick your LED light strips. Depending on their size, perhaps? Cut the LED strip into as many pieces as you’d like if it’s only a little strip for decoration.
It won’t work if it’s a long strip unless you solder everything together before chopping it apart. This might be challenging, though, depending on its size.
