Brother Printer is one of the most popular and acclaimed printer brands globally due to its outstanding devices. However, as with any printer brand, you may experience
Brother printer issues. While using the printer, error messages and codes may appear on the LCD screen. You need to know what causes the Brother printer in error and how to resolve the issue.
Table of Contents
Why does the Brother Printer status get an error?
There are many possible reasons why the Brother Printer status may be in error. Some of the leading causes are:
- BIOS issues can also cause errors in the printer.
- A slow internet connection can cause the printer to go into an error state.
- The printer cable and USB configuration are incorrect.
Common problems with Brother printers in error state?
- Corrupted printer driver registry
- Loss of internet connection
What is the solution if the Brother printer is in an error state?
There are many reasons why a Brother wireless printer may be in error status. You need to be aware that pages will not print correctly on Brother printers that are in error.
Therefore, this error condition should be resolved as soon as possible. Before working on your primary solution, try a few simple steps to see if you can solve your printer problem.
Check the printer connection. Check the power cord and USB cable connected to your computer. Ensure they are correctly plugged into the socket and see if the problem is with the power cord.
Restart your printer and computer. Shut down the printer and Brother computer for a few minutes, restart them, and then restart both. A simple reboot can fix the Brother printer error status issue.
Check for Paper Jams-Check for paper jams in the printer tray. If you find such paper, remove it from the tray and use only supported paper.
After completing the above troubleshooting industry techniques, if your Brother printer is still in an error state, the Windows 10 issue will not be resolved.
Brother printers in error will not print the document and may cause problems, so please resolve the problem as soon as possible. You can use the following advanced troubleshooting methods to fix Brother printers in Windows 10 error conditions.
Method 1: Check the status of your Brother printer online or offline
If the Brother Printer in Error State Windows 10 or if you lose your connection for a long time, the printer may disconnect. Therefore, first, check if the printer is active. To do this, you need to follow the steps below.
- On Windows 10 systems, click the Windows button to open Control Panel.
- Select the Show Devices and Printers option from the Hardware and Sound section.
- Right-click the printer device and click the Set as Default Printer option.
- Click Printer Options in the upper left corner and uncheck Pause Printing and Use Printer Offline.
- Then restart the printer and see if it resolves.
- If you still get the error message on the screen, you can follow another solution.
Method 2: Restart the spooler service
Print queues are used to manage computer-to-printer printing tasks. It also contains a list of completed print jobs. Rebooting the print queue will also help fix Brother printers in Windows 10 error condition.
- Type CMD in the Windows search box, right-click and select Run as administrator.
- Then click the Yes button to allow the user to control the account.
- When a new screen appears, type net stop spooler and press Enter.
- Then, when the spooler service is stopped, type the command net start spooler and then press Enter to restart the service.
- A message is displayed stating that the spooler service has been successfully activated. Now close cmd and start printing.
The above method is beneficial for Brother printers in Windows 10 error conditions.
Method 3: Enable PnP detection
If you’re still worried about the proper solution for removing my Brother printer, you’re in an error state. Second, enabling Legacy Plug and Play detection can be just as helpful.
- Type Device Manager in the Windows 10 search box, or type the command devmgmt. msc in the Run box and click the Enter button.
- Click the View tab at the top to open Show Hidden Devices.
- Then find the Ports (COM and LPT) and click on them to expand the list.
- Right-click on the ECP printer port (LPT1) and open Properties.
- Click the Port settings next to the General tab.
- Select Use interrupts assigned to ports and check Enable Legacy Plug and Play detection.
- Click the OK button to save your changes.