Concrete steps are among the heaviest items available. It’s difficult and time-consuming to move them. A single blunder might be costly and undermine the entire operation. As a result, you must exercise extreme caution and calculate the process before performing it.
It will also require a forklift fork adaptor. The concrete steps must then be unloaded using a step handling bar. That’s just a little part of the whole procedure. If you want to learn more about working with concrete steps, keep reading.
Table of Contents
Create A Plan Before Lifting Precast Concrete Steps
Well, moving precast concrete steps is not an easy process. Create a plan if you still want to do it yourself without any professional assistance. So, you can execute it effortlessly and reliably.
Measure Concrete Steps
When it comes to laying concrete steps, math is crucial. Because the concrete steps must be kept as close as feasible to the house frame. The length of the steps must now be taken into account. Because doing it wrong could be fatal, this is vital.
The step and the wall will be separated. If there is a large gap between the steps, you must elevate them to adjust them. The step could also collide with the wall. Both the wall and the step will be significantly damaged.
Use A Lifting Trailer
Because the concrete steps are so heavy, lifting them is a huge pain. As a result, the first concern is always about lifting if concrete initiatives are mentioned. However, it would help if you first put on gloves because we don’t want your hands to get injured.
Light trailer cars are the greatest kind of transportation. They’re the simplest to put the steps in. If you like, you can even use large vehicles or trailers. However, you can lift concrete steps manually for a short time. A step handling bar is required for this.
It’ll grab securely on the steps if you set it there. Two persons may readily lift it to traverse short distances. However, do not use a bar to lift the stairs on your vehicle. Because it has the potential to create accidents, and there is no reason to risk it.
Place The Steps At the Decided Spot
All that is left is to unload and arrange the steps after lifting and hauling. This step takes some forethought and planning. It is necessary to move the concrete stairs multiple times when unloading them. It becomes really difficult if you don’t know how to do things correctly.
First, approach the house frame with the trailer car as close as possible. Use a stair trolley if the location is inaccessible to trailers. Lift one side of the steps after installing the step handling bar.
If you don’t already have one, request one from your dealer. It’s useful for getting the cart past tight locations. They can easily sneak beneath the stairwell. To begin, lay down the steps using the step handling bar. It must be as accurate as possible. You won’t need to raise it as much this way.
Create Bars On Both Sides Of Concrete Steps With PVC Pipes
The PVC pipe approach can also be used on the flooring. All you’ll need are six 1-inch diameter PVC pipes. The pipes will be 6 inches in length. When they cross the PVC pipes, get the steps and put them back in front.
Repeat this process until you reach your destination. Lift the bar on each side and remove the pipes once finished. Lift the steps one last time and secure them against the wall. Then check to see if it’s leveled. Finally, it may appear too difficult for you, but we understand.
Final Thoughts
Precast steps are heavy especially standard precast concrete steps. That’s why it is not easy only for one person to move from one place to another. However, you can surely change the place of your precast concrete steps by getting all guidelines from this post.
If you cannot handle all weight individually, hire professionals for reliable and quick services. Indeed, moving precast concrete steps is a daunting task. But you can surely do it efficiently after reading this post!
