When it comes to painting a cooler, the possibilities for color and design are unlimited. You’ll have a personalized keepsake that you may use for years if you take the time to prime, paint, and seal your cooler appropriately.
When you go outside, this is one of the nicest activities you can perform. You can draw much attention to yourself with only one special cooler.
These suggestions will assist you in quickly and easily producing a cool drawing. While writing on a cooler is more challenging than drawing on sandpaper, this method will allow you to express your creativity and personality wherever you go. Please return to this page for updates.
Table of Contents
Steps To Paint A Cooler
- Sandpaper
- Primer
- Paintbrush
- Sharpie marker
- Drop cloth
Start With Sanding
The first thing you should do is cover all of your cooler’s current logos and indents. If you have a cooler, you’ll want to cover the yeti emblem entirely. To begin, use spackle to fill in the indents and logos as smoothly as possible.
It’s time to get down to business. Sand as hard as you can on the cooler with the sandpaper. The goal is to sand your cooler until it’s completely smooth so that the paint can adhere easily. It will undoubtedly be difficult work, but it is crucial to the overall success of any painting project.
A properly sanded base can mean the difference between a paint job that lasts for years and one that peels away after only a few months.
Apply Paint Or Primer
This is the step during which the paint is applied to the cooler. All of your designs will be painted on top of the primer. Consider it the primer for a paint job. It’s generally better to spray the paint on rather than brush it on if you want the paint to stick to the plastic.
This type of paint adheres far better and dries much faster than ordinary paint. Don’t limit yourself to just one coat of paint. For best longevity, use a couple of coats instead.
Add Creative Design On Cooler
This is, without a doubt, the most crucial step. It’s where you may let your imagination run wild and construct the cooler of your dreams. You can hand-draw some preliminary draughts or print your logos and images if you choose.
Using printing as a method is a terrific option because it makes your designs look more consistent and professional.
Print Design On The Cooler
Printing out your design is the first step. You can then use carbon paper or stencils to trace it onto the cooler. You’ll need to position it on top of the cooler exactly how you want it to appear. Tape it to the cooler to make it hard, which will make things easier for you.
After then, use a pencil or a Sharpie to trace the design onto the paper. You’ll want to take your time with this one since you want it to appear just right. After all, the logo and designs are the major reason you’re painting your cooler. You can print the artwork you wish to put on the cooler and then Mod Podge it afterward.
Apply Paint Over Design
It’s now time to cover the design with paint. You’ll need to utilize the finer, more precise paint pens to do a good job here. They should be used for the tiniest details and any writing that needs to be done.
Larger sections of the design can be painted with brushes and sponges. Begin with one side at a time and double-check your work before moving on to the other. The transitions must be as seamless as feasible if each side has a distinct hue. This is also when you Mod Podge your intricate pattern.
Apply Sealer After Paint Has Dried
After you’ve finished, let your paint cure for one day. To keep the paint from chipping, apply a layer of Mod Podge and let it dry for a full day. The sealer gives your paint a glossy, professional appearance.
For the greatest results, you may need to apply several layers of sealant. Before applying the next layer of sealant, make sure the previous layer is completely dried.
Conclusion
Your cooler should be able to survive particularly damp conditions with the addition of a polyurethane coating. This will extend the life of your paint.
However, wait for at least a day for the sealant to dry before proceeding. Your cooler is now completely repainted! Prepare to see everyone’s heads turn in admiration as they marvel at your craftsmanship.
