Franklin water pumps are some of the most reliable on the market. That’s why they’re a top choice for many homeowners and businesses. But like any piece of equipment, they require regular maintenance to keep them running smoothly and efficiently.

One of the biggest benefits of owning a Franklin pump is that they’re easy to maintain. Thanks to their simple design, there are few moving parts that can wear out or break down over time. That means you won’t have to spend as much time or money on replacements or repairs.

In addition, Franklin pumps are built to last. They’re made from high-quality materials that can withstand years of use. So, if you take care of your pump, it will serve you well for a long, long time.

Of course, even the best pumps can eventually succumb to wear and tear. When that happens, you can count on the team at Franklin to provide you with the needed parts and prompt and professional services. 

Needless to say, it’s easy to see why many people choose Franklin water pumping systems. Not only are they built to last, but they’re simple to maintain. By keeping a regular maintenance schedule, you should experience few issues over the years.

A Quick Overview of a Basic Maintenance Routine

First, be sure to clean your pump regularly. Doing so will remove any dirt or debris that may clog the pump and cause it to work less efficiently. Use a garden hose to spray down the outside of the pump or employ a soft brush to gently scrub the pump’s surface.

Next, check the level of oil in the pump each month. If it starts to get low, fill the pump with more oil until it reaches the full line on the dipstick. This will keep the pump lubricated and prevent any parts from wearing out prematurely.

Finally, be sure to inspect the pump regularly for any signs of damage or wear and tear. If you notice anything unusual, don’t hesitate to contact a qualified technician or service representative for help. Again, with just a little bit of care, your Franklin pump will give you many years of trouble-free operation.

Maintaining Your Pump: The  Step-by-Step Process

 Let’s take a closer look at what, specifically, you need to do to keep your pump up and running.

Needless to say, a well-functioning Franklin electric water pump is essential for maintaining a consistent and reliable water supply to your home or business. Again,it can’t be stated enough – regular maintenance is key to ensuring your water pump operates efficiently and keeps your system running smoothly. 

Develop a Maintenance Checklist

Use the following information as a checklist to make maintenance a breeze.

1. Inspect Your Pump Regularly – What to Check

One of the best ways to ensure your Franklin electric water pump continues to run at peak performance is to inspect it on a regular basis. 

Check for any signs of leaks, wear and tear, or damaged parts. If any issues are detected, attend to them as soon as possible. This will prevent larger problems from occurring down the road.

Specific Parts to Check

Below are the major parts you should check:

1. Check the Pump Motor

The heart of your water pump system is the motor. Start by checking the motor for indications of wear or corrosion. Listen for any abnormal sounds, such as grinding or screeching, as they might hint at an issue with the motor’s bearings or other internal parts.

2. Take a Close Look at the Impeller

This rotating component moves the water through the pump system. Inspect the impeller for any signs of erosion, corrosion, or physical damage. These problems can decrease the efficiency of your water pump, which can eventually lead to failure.

3. Examine the Seals, Gaskets, and Hoses

Your water pump relies on seals and gaskets to keep components securely connected and prevent leaks in the hoses. Make sure to thoroughly examine these elements for any signs of cracking, wear, or leaking and replace them as needed.

4. Check the Pressure Switch

As an integral part of your Franklin Electric water pump system, the pressure switch monitors and controls the pressure inside the unit. Inspect it for any visible damage or corrosion and test its responsiveness to ensure it’s functioning correctly.

5. Survey the Pressure Tank

Your pressure tank maintains consistent water pressure throughout your home or business while prolonging pump life. It does this by reducing motor strain due to frequent starts and stops. Examine the component for any signs of wear or damage, including leaks or rust spots.

6. Review and Test the Electrical Wiring

Ensure that all electrical connections are secure and free from visible blemishes or corrosion. Look for frayed wires, loose terminals, or burned areas around connections – these may indicate potential electrical and fire hazards.

7. Examine the Water Inlet Screen

The water inlet screen protects your pump from debris that may enter the system and cause blockages or a breakdown. Check for clogs, corrosion, or other signs of obstruction and clean or replace the screen as required.

8. Check Overall Cleanliness

Lastly, inspect the area around your water pump for cleanliness. Ensure that there are no obstructions hindering the airflow needed to keep the system cool and efficient.

By regularly inspecting the critical parts of your Franklin Electric water pump system, you can maintain peak performance and extend equipment duration. Remember that proactive maintenance will save you from unexpected breakdowns and expensive repairs, which also ensures an uninterrupted water flow for your business or home.

 A clean pump will help prevent future issues with clogs and will more efficiently use energy.

3. Lubricate Moving Parts 

Just like any other mechanical device, your Franklin electric  water pump requires regular lubrication of its moving parts. By lubricating these components, you can prevent wear, reduce noises and extend the life of your pump’s internal bearings and seals.

Types of Moving Parts that Require Lubrication

1. Bearings

One of the major components requiring lubrication in a Franklin pump are the bearings. These parts support the weight of the motor, impeller, and other internal components while  allowing them to rotate with minimal friction. 

Lubricating the bearings reduces wear and tear, minimizes operational noise, and maintains smooth functioning over time.

2. Shaft Seals

Another essential component that requires lubrication is the shaft seal. The shaft seal prevents water from entering the motor housing and safeguards the internal components from potential operational harm. This type of erosion is compounded from exposure to water or other fluids. 

Proper lubrication of the shaft seals also reduces friction between the pump shaft and sealing surfaces. This allows the seals to create an effective watertight barrier.

3. The Impeller

Though not directly lubricated like bearings or seals, the impeller does indirectly receive benefits from consistent lubrication. The water or fluid that is pumped serves as a natural coolant and lubricant for the impeller. 

This type of  lubrication maintains efficient hydraulic performance by keeping the impeller rotating smoothly without undue stress or strain.

4. Motor Components

While not all Franklin water pump systems require oil-lubricated motors, some models may feature this type of design. For oil-lubricated motors, it’s vital to top off or replace the motor oil and follow the  manufacturer’s guidelines. The proper motor oil type and level play a significant role in motor performance and longevity.

4. Check the Electrical Components 

Your Franklin electrical water pump system relies on various electrical components to function optimally. Be sure to examine the wiring and connections for any signs of corrosion, fraying, and possible fire dangers.

The Electrical Parts You’ll Need to Examine

Testing motorized components can  help identify potential electrical issues that may impact your pump’s performance. While Franklin water pump products are made for various applications–residential, agricultural, and commercial—they do share some of the same electrical components.

 Let’s look at what you’ll need to inspect and how the parts are designed to worth together.

1. The Heart of the Electrical Operation – The Motor

At the heart of every Franklin electric water pump is a high-quality motor that powers the pump. Pumps usually feature either submersible or surface-mounted motors, depending on the intended application. The amount of electricity used depends on the horsepower of the motor.

As their names suggest, submersible motors are designed to operate underwater, while surface-mounted motors remain above ground. Both motor types are specifically engineered for efficient performance and long-lasting durability.

2. Capacitor

The capacitor plays a critical role in starting and operating the motor of your Franklin electric water pump system. It stores and releases electrical energy as needed, allowing for smoother motor operation and increased energy efficiency. A faulty or damaged capacitor can lead to inconsistent pump performance or even a failure to start.

3. Pressure Switch

A pressure switch is essential for maintaining proper water pressure throughout your pumping system. This switch monitors system pressure and activates or deactivates the water pump based on preset levels. The switch, when in working order, provides consistent and reliable performance.

4. Circuit Breaker

Safety is of the utmost importance when working with any electrical device, including water pumps. The built-in circuit breaker in the Franklin Electric water pump protects the pump and its electrical components. 

Damage may be triggered by power surges or short circuiting. As soon as the circuit detects a glitch in the flow of electricity then, it trips the breaker. The reaction ultimately prevents damage to the device or worse – fires, shocks, or other hazards.

5. Control Box

The control box is like mission control for your Franklin electric water pump system. It houses essential components like the capacitor, relay, and overload protector. In some pump models, it might also feature an advanced electronic control system to monitor and adjust pump performance. It does this by keeping pace with the water pressure and flow rate.

6. Wiring

Proper wiring is essential for the efficient functioning and safety of your pump. Franklin electric water pumps include high-quality wiring connections among the motor, control box, and the pump’s power source.

5. Schedule Routine Service with a Professional Technician

In addition to taking care of regular maintenance tasks yourself, scheduling routine professional service for your Franklin electric  water pump can help you detect some early warning signs before they become serious problems. 

Regular inspections by an experienced technician ensures that all aspects of your water pump are functioning properly and therefore prevents costly future repairs.

Summary

By regularly performing the above maintenance tasks and by keeping a watchful eye on your Franklin water pump’s performance, you can realize a longer pump life. A well-maintained water pump not only runs more efficiently but also prevents unexpected disruptions in your water supply. 

Remember that investing in proper maintenance today will save you time, money, and trouble down the line. So keep your Franklin water pumping system running smoothly and enjoy the peace of mind that comes with a reliable water supply.