One of the most difficult things a homeowner has to do is replacing their hot tub filter. In this article, you will find out all about how to go about replacing your Hot Tub Filter, as well as what type of replacement filters there are available.
Table of Contents
What is a hot tub filter?
A hot tub filter is a device that helps to improve the quality of the water in your hot tub. Over time, dirt and debris can build up on the filter and block it from performing its intended function. When this happens, it’s important to replace your hot tub filter regularly in order to keep your spa running smoothly and safely. Here are some tips on how to replace your hot tub filter:
- Open the lid of your hot tub and remove the coverings over the filters. You’ll likely see three or four large filters mounted on an assembly near the water line.
- If you have a detachable filter system, remove the filter by hand. If you have a built-in filter system, gently tug on it until it comes free from the bracket. Be careful not to break it! Once it’s free, gently shake off any excess water or dirt that may have collected on it before placing it in a trash bag for disposal.
- Replace your old hot tub filter with a new one by following these steps: Lift on the old filter until it pops off of its bracket. Carefully place the new filter into place, making sure that all tabs and clips line up properly before screwing it back down into place. Reattach any attached hoses and brackets before replacing the coverings over your hot tub filters.
How to clean a hot tub filter?
If your hot tub filter is starting to look dirty and is not producing the desired level of spa quality water, it is time to replace it. This guide will show you how to clean your hot tub filter and replace it in just a few minutes.
- Open the cover on the hot tub filter housing by unscrewing the four screws located at the corners. Be sure to remove any plastic or paper towels that may have been used to cover the screws during installation.
- Remove the foam padding that covers the inside of the housing. You will also notice a number of small white filters and a black water circulation pump assembly.
- To clean the filters, pour 1 cup of white vinegar into a bucket or sink full of warm water and mix well. Add enough cold water to make a comfortable bathing depth for yourself (approximately 8 cups). Soak all the filters for about 10 minutes, then rinse them off with fresh cold water. Let them air-dry before reinstalling them into their housing unit.
- To clean and replace the black water circulation pump assembly, pour 1 cup of white vinegar into a bucket or sink full of warm water and mix well. Add enough cold water to make a comfortable bathing depth for yourself (approximately 8 cups). Soak both pieces for about 10 minutes, then rinse them off with fresh cold water. Let them air-dry before reinstalling them into their housing unit.
How to replace your hot tub filter?
If your hot tub filter is starting to show signs of wear and tear, it’s time to replace it. Here’s how to do it:
- Shut off the power to the hot tub.
- Remove the cover on the hot tub filter.
- Unscrew the old filter from the metal housing and remove it.
- Screw in the new filter and reattach the housing cover.
- Turn on the power to the hot tub and test the filter by filling it with water and turning on the jets.
Where to buy a hot tub filter?
When it comes to replacing your hot tub filter, there are a few different places you can go to get the job done.
The most popular option is to take your filter down to a local pool or spa store, where they will be more than happy to install a new one for you.
If you’d like to do the job yourself, there are several options available. You can purchase a replacement filter assembly directly from some of the major brands in the industry, or you can find them online and do it yourself. Either way, make sure to read through the installation instructions carefully before getting started so that you don’t end up damaging your tub or filter.
Conclusion
It’s always a good idea to check your hot tub filter regularly, and especially if you’ve been using it more frequently or for longer periods of time. Not only will this help keep your spa clean, but it will also prevent potential problems like clogged filters and Spa-Chemicals that can damage your spa.
