Curved vinyl fencing is ideal for distinctive fencing designs, transitional areas, or rounded property corners. DIY vinyl fence installation can provide your property the much-needed privacy it needs, contain the family dog, and improve the curb appeal for years to come.
If you follow the correct installation instructions, you could even be able to complete the curved fence installation task budget-friendly. Sadly, not all property lines are exact rectangles. You might not want that appearance for the shape of your fence, even if you have curved property lines.
The issue at hand is how to bend a vinyl fence. This article will discuss how to address property curves when installing fences. So, you can make a better decision during the fence installation around your angled property lines.
Table of Contents
Is It Possible To Curve The Fence?
We can tilt some fence portions to follow any bends along your property line. Splitting the pieces in half could be necessary to make a tighter curve for some shapes. Given this, we cannot bend the rails themselves to produce a curved design.
Doing this will compromise the fencing’s structural integrity, undermining the objective. The curved fences have a professional, balanced appearance. It would be advisable to employ a professional to install the fence along your curving property lines if you are not experienced as a DIYer.
Think about the most typical pitfalls before jumping into a project without preparation. Inadequate planning and disregarded building codes can lead to issues that quickly consume those savings and reduce the lifespan of a fence.
Factors To Consider Before Installing Curve Vinyl Fence
Contact your neighborhood zoning office to learn the regulations governing your fence installation before beginning any fencing project. If you have a homeowner’s association, you should also consider it. They may restrict the color or type of fencing material you can employ.
This is particularly valid for fences on properties that front streets. Before requesting a price for your fencing, consult with your HOA so that you may focus your search and make informed decisions.
Steps To Install Curve Vinyl Fence
A fence that curves might be a bit of a misnomer. No of the type of construction material, the section of the fence between each post is always straight. Each fence segment’s sequence of straight lines creates an arc if the posts are positioned in an arc or curve.
The right post placement is essential for a straight fence line while constructing a curved fence.
Prepare The Yard
Prepare your yard for installation by starting now. Don’t cut corners; the procedure takes roughly a week. It is perilous to dig without knowing what is beneath. A shovel strike to a utility line could result in fatalities or severe injuries.
Check your deed or the local assessor’s office to determine the property line if you intend to build the fence along the edge of your yard. While this procedure might seem annoying, it’s unquestionably better than digging out a fence.
Mark the outer edge of your fence with a can of vivid spray paint after determining your property line, utility lines, and property line. The last step is to remove any obstructions like rocks or garbage.
Measure The Fence
The fence’s curve should be noted. By laying a garden hose on the ground, little projects can be planned; spray paint can be used to indicate larger undertakings. Select the arc’s center and hammer a stake to create a flawless curve.
A string should be cut to the desired length, with one end tied to the stake. Create an arc by circling the stake with the spray paint while holding it at the end of the string.
Locate The Position Of Fence Post
Choose one of the curve’s ends and mark it with a stake. At this point, a fence post will be present. In wire fence installations, if there is a long run of fencing leading to the post, reinforce it with braces.
Repeat The Same Process For Each Post
Measure the distance from this stake to the next along the anticipated curve. Measure along a straight line. From the position of the subsequent post, repeat the procedure until the curve is finished.
Each designated position needs a hole dug for a fence post. Fill the holes with fence posts, then compact the earth around each post.
Install Wire
For wire fences, wrap the wire around the outside of the curve. To prevent the wire from losing tension if it separates from the posts, maintain it on the outside of the curve. Depending on your look, wood fence elements can be affixed to either side of the posts.
