One of the most effective ways to improve the security of your home and protect your family is to install outside surveillance cameras.
Installing a security camera on the house with vinyl siding, on the other hand, might be difficult, especially if DIY is not your strong suit. To install a security camera on vinyl siding, start by deciding where you want the camera to go.
A security camera is an excellent alternative if you feel insecure in your house or if you want to improve your overall security. Fortunately, many security firms offer security cameras that you can easily put on your home for regular monitoring.
Before installing the security camera, make sure it is in the greatest possible location for your home. You can work with the firm of your choice to figure out which camera is best for your home and whether you’ll need more than one. Continue reading if you want to discover how to install a security camera on vinyl siding correctly and quickly.
Table of Contents
Needed Tools To Mount The Camera
To make mounting Security Cameras easier, you’ll need to gather some tools and materials. We’ve compiled a list of resources for you.
- Drilling Machine
- No-Hole Clip Hooks
- Mounting Bucket Wrench for Supply Cables
- Wires
- Connectors
1) Determine The Location After Inspection
Before beginning the installation process, it is critical to choose the proper location. Place the camera as high as possible to get the best view. To prevent possible attackers from adjusting with the camera, consider a location that can only be accessible by ladder.
Aside from that, ensure sure the camera you’re going to mount isn’t going to be obstructed by trees, other structures, or shrubbery.
2) Determine The Placement Height
The majority of the time, homeowners will install security cameras in high-traffic areas around their property. This ensures that anyone who is not supposed to be in the house is captured on camera. It’s critical to install the camera at a difficult height to tamper with while still being close enough to the entrances for a clear view.
There are various types of security cameras on the market today, each with a different level of clarity. Before installing any screws or other mounting hardware, you should test the camera in several locations to confirm that you can see well. Some security cameras are solar-powered, while others must be plugged in.
Therefore the presence of an electrical outlet will also influence camera placement.
3) Use A Ladder
The following step is to obtain a solid and durable ladder. Place it firmly on level ground. Someone should ideally assist you by holding the ladder in place while you climb up. Accidents happen all the time, so don’t take any chances.
4) Mark The Points For Drilling
Position the mounting bracket on the vinyl siding and hold it in place once you’ve climbed up the ladder and reached the camera’s desired placement. With your other hand, use a pencil to mark the screw holes.
Mark the hole where the cables will run from the rear of the camera and through the siding if installing a wired camera. Make sure the markers are big enough to see and easy to find.
5) Mount The Side Brackets
Set the mounting bracket and pencil aside and inspect the vinyl siding; you’ll need a clear understanding of the surface you’ll be working with.
Take a look at the upper section of the siding by lifting the roofing shingles a little. Look behind it to see if the wall behind it is made of masonry or wood. Then, using a tape measure, determine the thickness of the vinyl siding. This will give you an indication of how deep the drill bit needs to go.
6) Use Right Drilling Tools
After you’ve completed all of the preceding steps, you’ll need to find a drill that’s 1/16 inch larger than the screw. Now go to the steps listed below.
- Install the drill bit into the power drill.
- Place the drill on the pencil marks so that the bit can make a horizontal and straight hole in the siding.
- Hold the drill firmly in your hand and begin drilling slowly. Avoid angling the drill above, downwards, or to the sides.
- Drill till the bit reaches the boxing beneath it.
- When you see a drill bit with a diameter smaller than the screw you’re going to insert, stop drilling. Drill up to 12 inches into the boxing drill once more.
- Drill all of the pencil marks in the same way. We want to remind you that drilling the hole for the wires may necessitate using a longer bit.
7) Mount The Camera Firmly
It’s time to screw the camera on tightly now that you’ve already drilled our siding vinyl or connected siding clips. Place the camera against the siding and check that the screw is aligned with the drilled holes. Begin putting the screw in place and tightening it with a tool.
Now that you’ve reached the end of the process, all you have to do is set up the camera. You can accomplish this by following the manufacturer’s instructions that come with the camera.
No Hole Clips Hooks Are The Best Alternative
If you don’t have a drill or want to damage your exterior, no-hole hooks are the way to go. You may mount your security camera without drilling a single hole in the siding vinyl with the help of the tool.
All you have to do now is rotate the hook into the side jointure. Aside from that, clip hooks are simple to remove when needed; consequently, if you live in a rental, clip hooks are the finest option.
Final Verdict
It is not as tough as you may believe in installing security cameras. You can complete the assignment by following the easy procedures we suggested. We can summarise the entire procedure in this section. First, find a great spot from where you can have a better view of your camera. Then, using a mountain bucket and a pencil, mark the holes.
Now, using a drill machine and a drill bit, drill the holes one by one. Screw the camera in place tightly once the drilling is completed. Then, according to the manufacturer’s instructions, set up the camera.
