How To Paint A Roll Up Garage Door?

One of the first items to upgrade on the exterior of your home is the garage door. Why? Because it’s one of the first things, you notice while inspecting a house. But, how do you paint a standard roll-up garage door? We’ve compiled a list of the most effective methods. It’s a simple weekend project with a big impact. Use color to your advantage and make your home a place you can be pleased to call home from the porch to the garage door.

There’s no reason why roller garage doors can’t be painted after they’ve been installed. They’re usually painted on a manufacturing line in the manufacturer. Roller garage doors with an unpainted factory finish can be painted after they’ve been installed. Spray painting a roller garage door is a proper method for achieving a factory-grade finish. Spray painting is a non-contact, non-marking painting technique. It also guarantees a low-maintenance, flat, and even paint finish.

Determine The Right Paint For The Garage Door:

Before you paint your garage door, have a strategy for choosing the perfect color. This will save you time and frustration. It’s simple to freshen the present color if it just requires a fresh coat. If an exact match isn’t attainable, use a hue as near the original as possible. It will be much easy to cover this way.

Another suggestion is to select a hue that complements your home’s design. To locate the right match, use color theory and the complementary color wheel. Choosing a color on the opposite side of the color wheel, for example, if your home is a shade of blue, is a terrific method to generate significant contrast and impact. If a roller shutter is not properly prepared before painting, the paint will quickly chip or flake. This is why selecting the right items is crucial.

Steps To Paint The Roll Up Garage Door:

Before you begin, check the weather forecast a few days ahead of time to ensure that it will be warm enough to paint the garage door. You should also make sure that no rain is forecast for the next two r three days while the paint dries. Gather The following supplies to paint effortlessly:

  • A ladder
  • Fine grit sandpaper
  • Drop cloth
  • Painter’s tape
  • Paintbrush
  • Paint roller
  • Water hose
  • Dust mask
  • Waterproof primer

1)Place The Drop Cloth Infront Of Door:

Place all of your painting supplies and materials on the side of the garage door, outside. Next, start at the bottom of the garage door and work your way up the length of it using your drop cloths.

You might also want to drape the drop cloths over any nearby vegetation or pavement to protect it from paint splatters and sprays. Before doing anything else, double-check that the garage door is completely closed.

2)Power Wash The Door:

Use a power washer or do it by hand for this stage. However, using a power washer will speed up the process. It would help if you cleaned any dirt, rust, or grime off the garage door during this phase. Pour a pail full of warm water with an all-purpose cleaner in it. After that, wipe down the garage door with your cleaning clothes or sponge to remove any visible dirt or grime.

Scrub any spots where the paint has corroded or chipped using a wire brush or a putty knife. After you’ve cleaned the door, rinse it well with your outdoor hose. Depending on the material of your door, you may need to wait for it to cure before painting it.

3)Check For Scratches Before Painting:

Now is the moment to cover up any significant dents, peeling paint, or scratches on your garage door. To do so, you’ll need to get a filler that’s made for the door’s particular material. You’ll need wood filler, for example, if you have a wooden garage door. Allow the filler to dry for the specified time before sanding the area with a fine-grit sandpaper block.

4)Mask Off The Locks:

You can now apply your painter’s tape to the garage after it has been cleaned and sanded. Mask off any locks, handles or ornamental features on the garage door that you don’t want to paint with painter’s tape. Any garage door trim should also be covered. Make sure the drop cloth doesn’t have any holes at the bottom of the door where the paint could dip into your driveway. To be safe, use painter’s tape.

5)Apply Exterior Primer:

Fill your paint tray halfway with primer and halfway with paint. Then, taking your paintbrush or roller, begin at the top of the garage on the left side. Using downward strokes, apply the primer on the garage door. Painting more than two feet of surface area at a time is not recommended. Make sure your ladder or stepping stool has a solid foundation while relocating it, so it doesn’t get caught in the drop cloths beneath it.

Apply one or two more coats of primer once the first one has dry. Ensure that any drips are painted over so that they do not dry and leave marks.

6)Paint The Door:

Take the exterior paint out of the pan and pour it into the paint tray after the primer has dry. Next, take your brush or roller and paint the garage door from top to bottom, starting on the left side of the garage. Apply the paint on the door in the same pattern you used to apply the paint to the door. Make sure you use even, smooth strokes.

Allow the first layer of paint to cure for the necessary amount of time before adding more coats as needed. Take a step back and examine your work after you’ve finished your last layer of paint. Revise any sections where you may have made a mistake.

Wrap Up:

Hopefully, this article has given you the information you need about painting the roll-up garage door. No doubt, appropriate planning is the key to success for any task. Before deciding on what type of paint to use, note the material your garage door is made of, and be sure to use a good primer first.

Also read: How To Cut Metal Closet Rod

Total
0
Shares
Related Posts