We all enjoy swimming in the pool, especially in the sweltering summertime. But as time passes, the interior of your pool may accumulate much dirt, which could endanger the health of everyone who swims in it and makes it seem not lovely.
Calcium deposits in a dirty pool make it seem not lovely, and manually cleaning a pool takes too long. An electric pressure washer provides the fastest, highest-pressure cleaning, saving you time. This eliminates all of your cleaning-related issues.
Pool tile upkeep won’t be a big issue because pressure washers can clean just about everything. The only difficulty of using pressure washers to clean pool tiles would be getting used to how difficult it is to control such powerful equipment.
Table of Contents
What Are The Reasons For Calcium Build-Up On Pool Tiles?
The main factor causing calcium deposits in swimming pools is water hardness. Calcium scaling over the waterline is a result of the water’s hardness. The calcium deposit will grow over the waterline if you let water with a high PH value into the pool.
The calcium deposit can sometimes hide algae. Summertime brings higher water temperatures and more evaporation, which causes calcium deposits to build up on the water layer. It is an additional typical reason for calcium deposits.
The swimming pool tiles can effectively clean calcium deposits with a pressure washer. In general, the white calcium deposit detracts from the beauty of your pool and makes it appear odd. If you don’t clean it immediately, these residues will naturally grow over time.
The calcium deposits in a pool may come into touch with water and get coated in green algae. You are compelled to avoid the pool because of this strange-looking algae. This is its negative side if you don’t clean the pool on time.
Steps To Pressure Wash Pool Tiles To Remove Calcium
Collect Needed Tools
Nylon Brush and Pumice Stone are also required to efficiently clean pool tile with a power washer. If you don’t have one, you can rent one, but if you have a pool at your house, you should have your own pressure washer since it is one of the instruments required for calcium deposits to be effectively cleaned or blasted away.
Even though calcium removal can be labor-intensive, experts and homeowners can complete the task with various equipment and substances. If necessary, wear personal protective equipment, including a respirator or mask.
Wet Pool Tiles
To clean your pool, you first must wet all the calcium deposits on the water layer using the highest pressure possible. You don’t need to empty any water. What maximum pressure your pressure washer is capable of delivering?
Keep in mind that if the pressure is too great, the tile may shatter if you wash it too closely or if it is positioned in a weaker position.
Scrub The Tiles
To achieve better results, scrape the deposits using a nylon scrubber or pumice stone. Once more, applying strong pressure after scrubbing to remove deposits, you can alternatively use a moist cloth or sponge. To completely clear the pool of all sediments, use a small pore strainer.
Use A Pressure Washer To Clean Tiles
Before and following the application of the cleaning chemical, you must use a pressure washer. A medium-duty electric pressure washer works best for cleaning pool tile, which you can use for all kinds of cleaning tasks around the house.
Natural Ways To Clean Pool Tiles
Use Vinegar
Cleaning the pool tile with vinegar may also be effective if you look for the simplest and greatest pressure washer cleaning method. The greatest cleaning solution for any form of cleaning is vinegar since it includes acetic agents that eliminate calcium and other mineral deposits.
Apply the cleaner to the surface of the calcium deposits and wipe them down with a cloth or sponge. Vinegar can remove any dirt, grime, and deposits quickly and effectively. The finest vinegar to remove calcium deposits is often white distilled vinegar; never use colored vinegar for cleaning.
The fact that white distilled vinegar won’t leave stains on tile makes it the finest method for cleaning pool tile.
Use Baking Soda
The most popular cleaning agent is baking soda, which is readily available. To clean the pool tile, combine one baking soda with three parts water for a baking soda solution. Apply the baking soda with a sponge or piece of cloth dipped in the baking soda water recipe after first wetting all of your dirt and deposits with a power washer.
Then run through a nylon scrubber. Tightly scrub the portions. You’ll see that as you scrub, the white calcium deposit particles will migrate following their location. Next, fill the turbo nozzle or any other high-pressure nozzle with material, and then rinse with clean water using the pressure washer’s highest setting.
Bottom Line
You can choose one from the cleaning procedures listed above using the information above; they are all simple. Depending on how dirty your pool is, you can either drain the water and clean it or not.
If you have any additional questions, you may leave a comment below. Hopefully, you will find the answer to how to clean pool tile with a pressure washer. Every technique described above has been tried and tested on a pool at home.
While using branded cleaner is expensive, cleaning tile with vinegar, baking soda, and muriatic acid is inexpensive. You may quickly cross this task off your to-do list by pressure-cleaning your pool’s tiles. Compared to hand-washing the tiles, it goes faster and is less unpleasant.
To ensure that you finish this task properly and without inflicting harm or injury, you should take several precautions.
