Rubber is a great option for a variety of flooring projects. It’s a natural product that’s long-lasting, comfortable to walk on, and resistant to slipping. Rubber flooring is an expensive investment, but it will survive for a long time if properly cared for.
It may appear that learning how to clean and maintain your rubber flooring is a simple operation, but it is crucial. You will prevent damaging the rubber and make the entire process easier and cost-effective in the long run if you spend time upfront learning about the particular qualities of rubber and developing tailored care techniques.
At least once a week, sweep the stairs with a broom or vacuum them with a heavy-duty professional vacuum cleaner. When necessary, scrub the surface with a firm bristles brush using a light detergent.
Table of Contents
Create A Maintenance Plan Even Before Installing Rubber Stairs And Flooring
We propose that you think about and create a personalized care and maintenance plan before installing rubber flooring. Weather conditions, rubber type, and traffic flow are just a few elements to consider.
The protocol should change due to these conditions and even seasonally.
Steps To Clean Rubber Stairs
Use Vacuum Cleaner For Regular Cleaning
Dry vacuum the rubber floor to remove all grit and grime. So, you don’t miss any places, work from one side of the room to the other. Rubber floors and stairs can be damaged by dirt, causing them to wear unevenly and lose their luster.
Prepare A Mild Cleaner
Make a water-and-soap cleanser. Fill a bucket with warm water after adding 1/4 cup of mild dish soap. Do not use more soap, as this will leave a filmy residue on your floor. The amount of soap specified is dilute enough to clean without leaving a film on the surface.
Mop The Stairs
Warm water and light dish soap should be used to mop the floor. Start at the farthest point from the room’s door and work toward the exit by scrubbing the rubber stairs with soapy water. Occasionally wring your mop. You can avoid treading on the freshly mopped rubber stairwell by exiting the room last.
Don’t Use Harsh Cleaners On Rubber Stairs And Floor
Several solvents and acids can degrade or dissolve rubber flooring if used frequently. While rubber is resistant to typical wear and tear, employing harsh chemicals for weekly cleaning can cause your rubber to fracture and disintegrate. If at all feasible, use basic soap and water.
The softest part of rubber flooring is right after it is installed. It hardens and toughens as it ages. According to the manufacturers, it’s usually best not to clean it during the first three to four days after being installed. If you try to do so too soon, your floor may be permanently damaged.
Use Vinegar Solution To Remove Tough Stains
Treat your rubber flooring and stairs with a white vinegar solution to remove water-based stains as they occur. Water and white vinegar should be combined in a solution. To remove as much discoloration as possible, apply the mixture to the damaged area with a cloth in small circles.
When you’re done, mop the area with water and mild dish soap, just like you would for regular cleaning. Allow for air drying of the affected region.
Use Paint Thinner For Paint Stains
If you get paint on your rubber stairs, wipe the drips with a small bit of paint thinner. Before starting working, put on rubber gloves, make sure the space is well ventilated and put all dogs and children out of the way.
Using a clean, dry cloth and a little amount of paint thinner, wipe the dripped areas in a short sweeping motion, changing the cloth each time. Paint chips will begin to peel and lift. Paint specks should be swept into a dustpan and discarded. When you’re done, mop the area with soap and warm water, then let it air dry.
Maintain The Rubber Stairs And Floors
The underlying adhesive that attaches the rubber to your floor and stairs might be harmed by standing water. To keep your rubber from cracking and deteriorating, be meticulous in clearing up any spills or standing water.
Vacuuming your rubber floor and stairs every other day will help keep surface debris at bay and keep it looking new. Surface scratches are reduced when there is less grit on the floor. Once a week, mop with soap and water. Making a calendar reminder to clean your floor regularly will help you remember.
Final Thoughts
Above all, rubber is a high-quality product that requires an investment to purchase and install, but it may last longer if properly maintained. Take the time to examine the area before purchasing. Consider the correct entryway system for soil removal, and have a holistic plan to maintain the rubber and surrounding regions that will meet expectations.
Rubber flooring and stairwells harden with time, making them more filth and wear-resistant. To help your rubber floor and stairs last longer, vacuum and regularly clean during the first year.
