Definition of contouring: Contouring is the method used in surveying to determine the elevation of the points and to connect the points of equal eleva...
Read more Contouring In Engineering Survey Types, Uses, Characteristics
Definition of leveling: Leveling is generally followed technique to obtain the elevation of one point relative to another. Leveling helps in engineeri...
Read more Leveling in Engineering Survey
Angle beams contain two legs that converge at a right angle to one another to form an L-shaped structure. The two legs may have similar or different l...
Read more Design of T and L Beam in Flexure.
A frame is a structure composed of several members that are either fixed–or pin–connected at their ends. It is often necessary to draw shear and m...
Read more Shear and bending Moment Diagrams for Frames
Frame structures combine beam, column and slab to resist the lateral and gravity loads. These structures are usually used to overcome the big moments ...
Read more Types of Frame Structures Rigid and frame structure
Background The problem in increasing the capacity of the beam is the restriction that As should not exceed Asmax. This places a restriction on the max...
Read more Design of Doubly Reinforced Beam in Flexure
Behavior of RC Beams Under Gravity Load Beam Test In order to clearly understand the behavior of RC members subjected to flexure load only, the respon...
Read more Design of Singly Reinforced Beam in Flexure
Standard Followed ASTM C 698 or AASHTO T-99 Objective The performance of standard proctor test targets the following objectives, To investigate the mo...
Read more Standard Proctor Test ASTM: D698-91 Apparatus, Procedure, Results
If only a few of the member forces are of interest, and those members happen to be somewhere in the middle of the truss, it would be very inefficient ...
Read more Analysis Of Trusses By Method Of Sections
The method of joints is one of the simplest methods for determining the force acting on the individual members of a truss because it only involves two...
Read more Analysis Of Trusses By Method Of Joints